新闻资讯

南方双彩网>>新闻资讯 >

挖掘机跳挡的与什么缘故缘故原因有关?

日期:2018-08-23   源头:http://www.degradedijital.com/
挖掘机跳挡的缘故缘故原因很多,在在频繁的换挡进程中,各啮合齿轮的轮齿端面易被磨成锥形,会构成其啮合遵从飞扬而招致"跳挡";换挡装置调停不当该型挖掘机的变速器采取的是呆板式人力换挡的要领,若变速杆、纵轴、横轴及竖壮实螺钉松动亦可构成变速器"跳挡";外界负载的突然改造以及应用不当等等,武汉挖掘机租赁阐发该怎样防范跳挡标题呢。
There are many reasons for the gear skipping of excavators. In the frequent shifting process, the end face of each meshing gear is easy to be ground into a cone, which will cause its meshing performance to decrease and lead to "skipping"; the transmission of this type of excavator is made by mechanical manual shifting, such as transmission rod, longitudinal shaft, horizontal shaft and vertical shaft. Fixed screw loosening can also cause transmission "jump gear"; sudden changes in external load and improper operation, etc., Wuhan excavator lease analysis of how to prevent jump gear problem.
防范步伐:
Preventive measures:
(1)严厉依据应用规程和驾驶要领举行应用,尽管纵然抑制换挡时"打齿",以淘汰齿轮副的磨损。
(1) Strictly follow the operating rules and driving essentials to operate, as far as possible to avoid shifting "teeth" to reduce gear wear.
(2)严厉实行颐养制度,增强换挡装置的维护颐养。当换挡装置杆系衔接不事前应及时调停,确保换挡装置遵从精良。
(2) strictly implement the maintenance system and strengthen the maintenance of shift devices. When the linkage of the shift device is not connected, it should be adjusted in time to ensure the performance of the shift device is good.
(3)看重对自锁机构的维修与颐养,对定位作用飞扬或失失定位效能的定位钢球、弹簧及拨叉轴,应及时修复或互换,使自锁机构的自锁遵从处于精良的外形。
加长臂挖掘机租赁
(3) Pay attention to the repair and maintenance of the self-locking mechanism, and repair or replace the positioning ball, spring and fork shaft in time, so that the self-locking performance of the self-locking mechanism is in good condition.
(4)组装变速器时,应严厉按应用规程举行应用,确保变速器各机件调停准确、紧定妥当。较大的下坡路面时,驾驶员应严厉依据下坡的方法要领举行应用,切不可违规。
(4) When assembling a transmission, it should be operated in strict accordance with the operating rules to ensure that the transmission components are correctly adjusted and properly fixed. When a large downhill road surface, the driver should strictly follow the downhill action essentials to operate, must not violate the rules.
在挖掘机的行驶进程中,若出现变速器"跳挡"时,应及时使呆板停机,然后查找缘故缘故原因,扫除拦阻。细致要领是:
In the course of excavator driving, if the transmission "jump" occurs, the machine should be stopped in time, and then find the cause, troubleshooting. The specific methods are:
1.在平路下行驶时出现"跳挡",可按正常的停秘密领停机,细致查找缘故缘故原因,扫除拦阻。
1. When running on a flat road, there is a "jump in gear", which can be stopped according to the normal stopping essentials, carefully find out the causes and troubleshooting.
2.在下坡道下行驶时出现"跳挡",应按加挡的方法要领将挡位置于高-速的位置或采取"抢挡"步伐,待呆板行驶到坡底后再停机查抄,扫除拦阻;若"加挡"、"抢挡"不可功或又一次出现"跳挡"时,驾驶员可将倡议机转速控制在中速,采取"点刹"的要领使呆板滑至坡底,然后扫除拦阻。
2. When "jumping gear" occurs on the downhill, the driver can control the engine speed at the middle speed if the "shifting gear" and "snatching gear" are unsuccessful or another "jumping gear" occurs. The "point brake" method is used to slide the machine to the bottom of the slope, and then remove the trouble.
3.上坡行驶时出现"跳挡",可将挡位置于低-速位置或Ⅰ挡位置,待呆板行驶到坡顶时再停机,扫除拦阻;若减挡不可功或又一次出现"跳挡"时,应按坡道停机的方法要领及要求停机,然后扫除拦阻。
3. Uphill driving when there is a "jump gear", can be in the low-speed position or the first gear position, when the machine is driving to the top of the hill again stop, troubleshooting; if the gear reduction is not successful or another "jump" occurs, should stop according to the ramp stop action and requirements, and then troubleshooting.
有了加长臂挖掘机租赁下面的小总结,盼望对重办客户有所资助,要是有什么不睬解的约莫寻求资助的请点击南方双彩网的官方网站:http://www.degradedijital.com约莫来电咨询,南方双彩网会尽快乐为您料理
With a brief summary of the lease of the Extended Arm Excavator, I hope it will be helpful to our customers. If you don't understand or ask for help, please click our official website: http://www.degradedijital.com or call us for advice. We will try our best to solve it for you.

【本站图片均由网站全部方提供,局部图片源头于网络,如偶然偶然中陵犯了某媒体或集团私家的知识产权,请来信或来电告之,本网站将立刻删除。】