新闻资讯

南方双彩网>>新闻资讯 >

挖掘机拆楼臂陈设前需要过细哪些细节?

日期:2018-12-06   源头:http://www.degradedijital.com/
今天几个主人分开我公司跟我讲还是我公司做的拆楼臂质量结实,用了快一个月了也没出什么质量标题,反到是其他厂家给他们做了几套拆楼臂,通常有多么那样的标题,突出的便是铲斗油缸拉缸,用了不到一个月就一台机曾经用坏了2条铲斗油缸,问南方双彩网用的是什么品牌的油缸,质量这么好。
  Today, several guests came to my company to tell me that the quality of our company's demolition arm is reliable. It has been used for almost a month without any quality problems. On the contrary, other manufacturers have made several sets of demolition arm for them. There are often such and such problems. The most prominent one is the bucket cylinder pulling cylinder. It takes less than a month to build a machine. Two bucket cylinders have been damaged. Ask us what brand of cylinders we use. The quality is so good.
  并想相识一下我公司现成的油缸可否能装到他们那几台拆楼臂挖机下面去,我叫主人让那个厂家把铲斗油缸图纸发已往,结果发现不通用,油缸行程我公司比那家的长60mm,陈设的销子孔是一样的,要是装上我公司的铲斗油缸会出现收的时间收不到位,伸的时间锤子会遇到小臂,以是用不了。出现这种拉缸的标题很明白是油缸质量标题,听说那油缸是肇庆那边买的,细致厂家不祥。我公司是用专业的油缸,。以是质量相对结实一些。
  And I want to know if our existing cylinders can be installed on their several arm diggers for demolition. I asked the customer to ask the manufacturer to send the drawings of bucket cylinders. It was found that they are not universal. Our cylinder stroke is 60 mm longer than that one. The pin holes installed are the same. If we install our bucket cylinders, it will be the same. The hammer will touch the arm when it stretches, so it will not be used. The problem of this kind of cylinder pulling is obviously the quality problem of the cylinder. I heard that the cylinder was bought over there in Zhaoqing. The specific manufacturer is ominous. Our company is a cylinder company which belongs to Sanyi ZTE and Hunan Sanxing. So the quality is relatively reliable.
  这主人一共订了7套拆楼臂,原本全放我公司做的,但要求4月25日前要交完货,事前谈的时已到3月初,离交货时间只需50天左右,3月、4月又是我公司忙的时间,以是南方双彩网只接了4套,让了3套给其他厂家,那几套拆臂我去看过,跟我公司的挖机拆楼臂相比还是有不少差距的,从以下几点相比:
  The customer ordered seven sets of dismantling arms, which were originally made by our company, but required delivery before April 25. At that time, the time of delivery was only about 50 days, and March and April were our busiest time. So we only received four sets and let three sets to other manufacturers. I have seen those sets of dismantling arms. Compared with our company's excavator demolition arm, there are still many gaps, from the following points:
  一、从加装的备用阀相比,我公司用的是合股备用阀,脚踩阀也是CAT原装的,那个厂家用的是国产备用阀和国产脚踩阀,这里一台机本钱相差大几千块,从美观方面相比合股备用阀装好后很美观、划一。国产备用阀管路显的很乱,十分不美观。从应用方面相比:CAT原装脚踩阀踩的时间脚感很好,国产脚踩阀踩的时间十分僵硬。从常远相比:合股备用阀很少会出现漏油的环境,国产备用阀出现漏油的环境概率会大一些。
  1. Comparing the spare valves installed, our company uses the joint-venture spare valves, and the foot-stepping valves are also the original ones of CAT. The manufacturer uses the domestic spare valves and the domestic foot-stepping valves. The cost of a machine here varies greatly by several thousand yuan, which makes the joint-venture spare valves beautiful and neat after being installed. The domestic spare valve pipeline is very messy and beautiful. Comparing from the operation: The foot feels very good when the original CAT foot stepping on the valve, while the domestic foot stepping on the valve is very stiff. From long-term comparison: Joint-venture spare valves rarely leak, and domestic spare valves have a higher probability of leaking.
加长臂挖掘机出租
  二、从臂的用材上相比,我听主人说他们上下盖板是用Q550的质料,我公司用的是Q690D质料,这里一套臂南方双彩网直接质料资源又比他们高几千块,固然我公司的拆楼臂强度自然会他们的好很多。
  2. Comparing the materials used in the arms, I heard that the upper and lower cover plates are made of Q550 material. Our company uses Q690D material. The direct material cost of a set of arms here is several thousand yuan higher than theirs. Of course, the strength of the arm of our company will naturally be much better than theirs.
  三、从软管的用材相比,我公司用的是美国GATES的油管,那个厂家用的油管品牌不明白,但看一去质量一样伟大般,一套臂上去资源我公司又比那家公司高两叁仟元。
  3. From the comparison of hose materials, our company uses GATES tubing. The brand of tubing used by that manufacturer is not clear, but look at the general quality, the cost of a set of arms is two or three thousand yuan higher than that company.
  四、从铲斗油缸来相比,我公司用的三频频起的油缸,那家公司用的是一样伟大厂家斲丧的油缸,多么一条油缸我公司又比那家公司贵仟块。
  4. Comparing with the bucket cylinder, the Sany ZTE cylinder used by our company is the cylinder manufactured by the general manufacturer. This kind of cylinder is more expensive in our company than in that company.
  多么算上去,他们一套臂比我少壹万多元的资源。以是说在谈挖掘机拆楼臂的时间一定要让厂家提祥细的南方双彩网产品图纸,和注明相关外购配件的品牌、型号、原产地等相关信息。只需相关技术要求同一后才比如价钱,不然一套22米的挖掘机三节拆楼臂相关万儿八千真的未几。
  In this way, they have a set of arms less than 10,000 yuan in cost than I do. So when talking about the excavator's dismantling arm, we must let the manufacturer mention the detailed product drawings, and indicate the brand, model, origin and other relevant information of the relevant outsourced accessories. Only when the relevant technical requirements are unified can it be compared to the price. Otherwise, a set of 22-meter excavator with three dismantling arms is not much.

【本站图片均由网站全部方提供,局部图片源头于网络,如偶然偶然中陵犯了某媒体或集团私家的知识产权,请来信或来电告之,本网站将立刻删除。】